Flatten Drums, Crush Waste Drums

55SC

Priced for the small volume generator using 55-gallon drums.

55SC

Whether compacting paint booth filters or low-level radioactive waste, the Model 55SC is an economical choice that still packs a huge punch.

The Model 55SC is available in a "standard" electrical version as well as two explosion-proof configurations. Both the Model 55SC and the 55SC-EX use 3-phase electrical power to drive the hydraulic cylinder and controls.

The Model 55SC-P unit uses no electrical power at all, but rather uses standard compressed air to drive a pneumatic air motor. This air motor in turn drives the same hydraulic circuitry that is used on the 55SC-EX. With the exception of the power source, all three versions are identical in operation and specification.

The 55SC has a hold-down control feature built into the hydraulic system. When the compaction head lowers and reaches maximum pressure, the hydraulic system locks. Maintaining this compaction head position tends to break down the memory of the material. This prevents material springback which significantly improves volume reduction.

This control is extremely helpful when compacting lightweight waste like paper, cloth or plastic. The compaction head will stay in this position almost indefinitely - even with the motor turned off.

40,000 lbs. hydraulic force for inside drum compaction/drum crushing
55SC features clearance above drum for drum overfill
Single Hydraulic Control Lever, semi automatic cycle
4" NFPA cylinder with 2.5" chrome rod
Reinforced steel Crushing Chamber with 1" thick base plate
1" Steel Compaction Head with drum crushing plate included
Two stage gear pump

Models Available

Model 55SC
3-HP TEFC motor
Motor Starter housed in a NEMA 1 UL Listed enclosure
Electric door interlock
Hydraulic directional cylinder control

Model 55SC-EX
3-HP Class 1, Division 1, Group D explosion-proof pump motor
Non-sparking hydraulic door interlock
Hydraulic directional cylinder control

Model 55SC-P
3-HP Air driven pump motor
Non-sparking hydraulic door interlock
Hydraulic directional cylinder control

Available Accessories

Drum Handling : Move drums to and from the compactor
Alternate Compaction Head - (CH) : Crush empty drums with the same machine
NEMA 4 Water Tight Enclosures : A must for outside installations
PAK-MORE Hold-down Disk : Improve volume reduction
Air Filtration and Ventilation : Control dust & vapors
Liquid Containment : Control spills or leftover residue
Special Custom Options

Model	55SC
Recommended Uses:
Drum/Container Crushing
Inside Drum Compaction
Compaction Chamber Height	43.0"	109.0cm
Compaction Chamber Width	27.0"	69.0cm
Door Opening Width	26"	66.0cm
Full Cycle Time	115 sec.
Machine Depth	31.25"	79.0cm
Machine Width	30.25"	77.0cm
Overall Machine Height	107.0"	272.0cm
Electric Motor	3 HP	2.2kW
Ship Weight Including Oil	1800 Lb.	817kg
Air Motor for 55SC-P	130-SCFM @ 90-PSI

55SC

S&G Enterprises, Inc.