55SC Drum Crusher
For low-volume drum crushing.
Printable PDF Flier
When you are looking to crush a few dozen drums a month, look no further than the Model 55SC.At 40,000 pounds, this powerful machine will crush a drum flat to 6.5 inches tall. Yet, it is still economically priced.
The Model 55SC is available in a "standard" electrical version as well as two explosion-proof configurations. Both the Model 55SC and the 55SC-EX use 3-phase electrical power to drive the hydraulic cylinder and controls.
The Model 55SC-P unit uses no electrical power at all, but rather uses standard compressed air to drive a pneumatic air motor. This air motor in turn drives the same hydraulic circuitry that is used on the 55SC-EX. With the exception of the power source, all three versions are identical in operation and specification.
- 40,000 lbs. hydraulic force for inside drum compaction/drum crushing
- 55SC features clearance above drum for drum overfill
- Single Hydraulic Control Lever, semi automatic cycle
- 4" NFPA cylinder with 2.5" chrome rod
- Reinforced steel Crushing Chamber with 1" thick base plate
- 1" Steel Compaction Head with drum crushing plate included
- Two stage gear pump
Models Available
Model 55SC
3-HP TEFC motor
Motor Starter housed in a NEMA 1 UL Listed enclosure
Electric door interlock
Hydraulic directional cylinder control
Model 55SC-EX
3-HP Class 1, Division 1, Group D explosion-proof pump motor
Non-sparking hydraulic door interlock
Hydraulic directional cylinder control
Model 55SC-P
3-HP Air driven pump motor
Non-sparking hydraulic door interlock
Hydraulic directional cylinder control
Available Drum Crusher Accessories
- Drum Handling : Move drums to and from the compactor
- Alternate Compaction Head - (CH) : Crush empty drums with the same machine
- NEMA 4 Water Tight Enclosures : A must for outside installations
- PAK-MORE Hold-down Disk : Improve volume reduction
- Air Filtration and Ventilation : Control dust & vapors
- Liquid Containment : Control spills or leftover residue
- Special Custom Options
| Model | 55SC | |
| Recommended Uses: | ||
| Drum/Container Crushing |
| |
| Inside Drum Compaction |
| |
| Compaction Chamber Height | 43.0" | 109.0cm |
| Compaction Chamber Width | 27.0" | 69.0cm |
| Door Opening Width | 26" | 66.0cm |
| Full Cycle Time | 115 sec. | |
| Machine Depth | 31.25" | 79.0cm |
| Machine Width | 30.25" | 77.0cm |
| Overall Machine Height | 107.0" | 272.0cm |
| Electric Motor | 3 HP | 2.2kW |
| Ship Weight Including Oil | 1800 Lb. | 817kg |
| Air Motor for 55SC-P | 130-SCFM @ 90-PSI | |
 |
RAM FLAT | Vyleater | Aerosolv | Morse | SlydEater Customer Support | Literature Download | Order Information | Order Online S&G Home | Company Profile | Contact Us | Sitemap S&G Enterprises, Inc.N115 W19000 Edison Drive, Germantown, WI 53022Phone: 1-888-RAM-FLAT · (888) 726-3528 · (262) 251-8300 Fax: (262) 251-1616 · Email: or Copyright © S & G Enterprises, Inc. | All Rights Reserved Privacy Statement |
){kind=link}
){kind=link}