PACK-MASTER® Drum Compactors, Waste Drum Compactors

PACK-MASTER® Drum Compactors

The Pack-Master^® is ideal for the low volume user who is looking to reduce their volume on a few drums a month.   While not as heavy duty as the RAM FLAT COMPACTORS, the Pack-Master drum compactors are well suited for easy to compact applications like paper waste.

Available in three versions, all models are void of any electrical power requirements and are appropriate for use in an explosion-proof environment.   For extra protection, one unit is available with non-sparking contact surfaces to eliminate any possibility of spark.

Model 1258: This unit features a manually operated, ratchet-type compaction ram.   Capable of creating about 2,500 to 3,000 pounds of compaction pressure, the #1258 has a full stroke length of 39-inches allowing a 4-inch clearance above the drum.

Model 1259: This unit utilizes a compressed air source to create a semi automatic compaction cycle. At an incoming line pressure of 100-PSI, the compaction pressure is 2,600 pounds and can go as high as 3,900 pounds at 150-PSI. With a stroke reach of 24-inches into the drum (plus a 4-inch above-the-drum clearance), the typical cycle time is about 1-minute regardless of the input air pressure. A 1/4 quick disconnect fitting is provided to make installation easy.

Model 1453: This unit is a spark-resistant version of the Model 1259 described above. Key contact surfaces on the compaction platen and the compactor frame and baseplate are covered with a no-spark, non-metallic material.

Options Available

SORBENT BASKET #1463: This heavy metal basket is inserted in the drum with clips resting on the top drum chime. With the basket filled with wet rags, the compaction platen squeezes the waste displacing the liquid through the basket and into the bottom of the drum. The basket has a 2.5 cubic feet capacity.

ROLL-OUT BASE #1857: You may wish to consider the Roll-Out Base.   This option permits even full drums to be easily slid in and out from underneath the compaction plate while allowing the operator a quick method to fill and refill the drum.   During compaction, four spring-loaded casters retract, enabling full compaction to take place without distorting the Base.

DUAL WHEEL KIT #1260: This option makes the Pack-Master portable.   Two casters are fastened to the baseplate and when tipped, the unit can be moved out of the way until needed.

SPLIT BARREL #1397: To compact material into a cylindrical shape or into a bag, the Split Barrel makes it easy.   Fill the Barrel and compact as if you were compacting into a drum.   When you're ready to get the material out of the Barrel, unlatch and swing it open on the continuous piano hinge.

Pack-Master^® is a registered trademark of Newstripe, Inc.

PACK-MASTER® Drum Compactors

Options Available

S&G Enterprises, Inc.